Installing Canon LiDE 60 scanner on OS X 10.6.6

I recently updated one of the PC's to an iMac, yay, but forgot to think about the scanner attached. It was a Canon LiDE 60 scanner. The mac had OS X 10.6.6. Tried "Image Capture" at the off chance it'd pick it up straight away and alas it did not.

I did a quick search on the internet and found this bit of info. It says you have to install two things, a driver and something else (didn't pay too much attention). A lot of people agreed with it.

I went to Canons website, found the downloads section for the scanner here and downloaded all the OS X stuff. I was a little annoyed that it does not have a description of any of the downloads. I would like to know what they actually are.

After I downloaded it I started off trying the driver called "deldrvosx1510efg.dmg". Looked good to begin with but then asked if I was sure I wanted to uninstall the Canon LiDE 60 scanner! After saying yes (didn't think it would do any harm) it crashed.

I next tried the "lide60osx11131en.dmg" which contained the "ScanGear CS 11.1 Eng_Installer.pkg" file. It was quick and painless and wanted a reboot. After the reboot I loaded up Image Capture and it worked a treat!

So, to conclude, you basically just need to install the ScanGear CS pkg file.

Done.

Jailbreaking iPhone 3GS with IOS 5.0.1

So, I've just got an iPhone 3GS which is locked to o2. The form has been filled out, and it'll take between 1 and 2 weeks. So I can either wait, or jailbreak! (that rhymes!)

Found this lovely website which goes into every detail of jailbreaking lots of things including iPhone 3GS with IOS 5.0.1.

A big thing to note is that if your iPhone every looses power, you will need redsn0w to reboot it (i think that means that you'll need your computer too!). This is a BIG problem, and hence forth I shall not Jailbreak my phone!!!!

Mac Pro startup trouble - White screen with no entry sign

On start up, mac makes startup noise, goes to white screen with Apple Logo and spinny thing at bottom, then after about 2 minutes the Apple Logo changes to a grey No Entry sign. Still the spinny thing at the bottom.

I've tried:

• reset PRAM/NVRAM (same thing)
• holding down "alt" and selecting Windows partition boots to windows perfectly!
• single user mode
• comes up with "Still waiting for Root Device"
• netboot - using deploy studio
• repair disk permissions is Disk Utility
• set startup disk to OS X
• reimage OS X

Found this apple article, although it's dated back to 10.1, and 10.2! Goes on about reseting PRAM, reinstall OS.

Finally, I thought I would try the Hard Drive on another machine, so I "firewired" it up to the machine next to it.

• I booted the broken one off the working one. Worked fine
• I booted the working one off the broken one. Worked fine

So I knew that both installations on both Hard Drives worked fine. To boot I held down "alt" and selected the firewire OSX to boot from. It appeared that using the "alt" key to select an operating system fixed the problem.

I then tried holding down the "alt" button, selected the OS X partition which wasn't working, and it worked fine!!

So, I finally concluded that it was down to the "bless" command you use. The one with Deploy Studio (which is how I set the boot disk originally) seems to not work with this machine.

So, to fix this:

1. I booted the machine on it's normal OS X partition (holding down "alt" to select the OS X partition)
2. Went into "System Preferences" and "Startup Disk"
3. Selected first the Windows Partition, and then the OS X partition

This hopefully set the "bless" command right again.

It worked!!

Unable to download IOS 5 software update through iTunes

I'm in the process of updating the iPads to IOS 5, but I'm stuck at the first stumbling block. I need to download the iPad update file. Whenever I click the update button through iTunes it starts to download the file, but a few minutes later it says:

There was a problem downloading the software for the iPad. Then network connection timed out

I found the file location it was downloading it to is:

/Library/iTunes/iPad\ Software\ Updates/iPad1,1_5.0.1_9A405_Restore.ipsw

It downloads approx 100MB, but this varies and then comes up with the error message. After a bit of searching I found this website which gives you direct links to the ipsw update files, straight from what looks like the apple download server. I've also found this website as well

Download location is for the iPad 1st gen is:
iPad1,1_5.0.1_9A405_Restore.ipsw

Download location for the iPad 2 - Wifi is:
iPad2,1_5.0.1_9A405_Restore.ipsw

Interestingly, after attempting this with Safari it also failed. I'm guessing it has to do with the proxy server we're using. I shall try another.

Finally downloaded it through another computer connected to a different proxy. Worked fine. Final file was approx. 750MB.

Loaded up iTunes, "alt" clicked the "Update" button and selected the downloaded file. Worked fine.


Update:
We're now on 5.1.1. Heres the link to the IOS update:

iPad 1

iTunes iPad backup location

I've noticed my Library folder get immensely large. I looked into it with OmnDiskSweeper (now that WhatSize has decided to charge) and found nearly 800MB (not much nowadays but too much for this as far as ICT Services goes) was taken up with iPad backups:

/Library/Application\ Support/MobileSync/Backup

I thought the easiest solution was to move it to the local scratch disk and symbolically link it. Heres the exact command I used to create the symbolic link:


ln -s /Volumes/Scratch\ Disk/Stephen/Library/Application\ Support/MobileSync/Backup /Network/Servers/appleton.chesterfield.ac.uk/home2\$/LeachS/Library/Application\ Support/MobileSync 

Seems to have done the trick.

I also noticed another folder taking up a lot of disk space whenever I tried to do a software update for the iPads:

/Volumes/Scratch\ Disk/Stephen/Library/iTunes/iPad Software Updates/

I decided to move the whole /Library/iTunes folder across. Here's the command I used to create a symbolic link:

ln -s /Volumes/Scratch\ Disk/Stephen/Library/iTunes /Network/Servers/appleton.chesterfield.ac.uk/home2\$/LeachS/Library

Internet Explorer desktop icon makes more Internet Explorer shortcuts on the desktop!

An interesting problem occured today. I was just going to browse the internet on an XP laptop using Internet Explorer when I noticed that whenever I clicked on the desktop shortcut for IE, IE wouldn't load up but a new "Shortcut to Internet Explorer" would pop up on the desktop. Clicking on the shortcut in the Start menu did not do the same, but would come up with the "Don't Send" option because IE had crashed.

I looked up the problem on the internet and found this. At the bottom it describes the fix for it. Which is some Regedit stuff plus a bit more.

I decided that it was worth trying to update IE first. Updated from IE 6 to IE 8 and worked a treat.

Photoshop CS 5 "Document was made in a newer version" work-around

I've just had a student struggling to open a photoshop file. The "error" that came up was something along the lines of:

Cannot open document as it was made in a newer version

This was not the case though, as the student had only ever used that computer to make the file. I checked his disk space of which he had 50MB free, and the photoshop file was 90MB. It could have been caused by a lack of disk space.

You could see OS X making a nice little preview of the file, and so I decided to try and open it using Preview (which does now open new PSD files). I opened perfectly in Preview and I selected "Save As" from Preview and saved it as another PSD file.

This opened without trouble in Photoshop, but I did notice it didn't have any layers. I did not ask the student if this was how he had made it, but I think it should have had layers. My conclusion is that Preview, upon saving, merges the layers. I'm also assuming that the PSD file was originally saved for "maximum compatibility" which saves a merged layer.

So, in ultimate conclusion, always "save with maximum compatibility" in Photoshop. This way you might have a better chance opening a "broken" file in Preview and saving it out of this.